#🍽️ Setting up a Raspberry Pi 5
I ordered a Raspberry Pi 5 and wanted to keep a record of the setup.
#Buying a Raspberry Pi 5
My graduation project needed a small computer with low power consumption. I chose a Raspberry Pi 5 because it was easy to work with and had plenty of resources available.
#Raspberry Pi 5 specifications
Specifications at a glance
- Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches and a 2MB shared L3 cache
- VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
- Dual 4Kp60 HDMI® display output with HDR support
- 4Kp60 HEVC decoder
- LPDDR4X-4267 SDRAM (2GB, 4GB, and 8GB)
- Dual-band 802.11ac Wi-Fi®
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- microSD card slot, with support for high-speed SDR104 mode
- 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2 × USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
- 2 × 4-lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
- 5V/5A DC power via USB-C, with Power Delivery support
- Raspberry Pi standard 40-pin header
- Real-time clock (RTC), powered from external battery
- Power button
#Installing an OS on the Raspberry Pi 5
Raspberry Pi provides Raspberry Pi Imager on its official site for writing an operating system to a card.
#Initial setup
- Download Raspberry Pi Imager from the official Raspberry Pi website.
- Open the imager and choose an operating system. I chose Ubuntu 24.04 LTS.
- Select the SD card, configure the Wi-Fi network and country, then choose Write to install the OS.
- Insert the SD card into the Raspberry Pi 5 and boot it.
Choosing the wrong Wi-Fi country can prevent the Pi from connecting.
This matters especially for a headless setup. If you’re relying on SSH without a monitor or keyboard, an incorrect Wi-Fi setting can leave the machine unreachable.
#Connecting over SSH
Once the OS is installed and the initial setup is complete, you can connect to the Pi remotely over SSH. This assumes the Pi has a working network connection.
Use the Pi’s configured IP address for the connection.